海水淡化系统余压能回收过程的仿真模拟

针对阀控式海水淡化能量回收装置增泄压过程中压力波动和浓盐水海水掺混导致反渗透膜组件工作负担变大的问题,对增压容器和增压过程建立模型,使用流体力学软件Fluent仿真增压过程,得到了增压过程液压缸内部流域的压力和速度分布。探究了混合段液柱活塞的形成过程和长度变化,通过对比液压缸结构和进水口流速变化对混合程度的影响,给出了用混合段做液柱活塞的参数特性和适用性,为海水淡化系统余压能回收设计提供依据。     

NICALON SiC/Al 预制丝热膨胀特性研究

本文研究了NICALON SiC束丝纤维增强铝预制丝在15～400℃温度区间内的热膨胀特性。研究表明预制丝两次热循环后得到的膨胀曲线不一致,该曲线在15～400℃范围的平均热膨胀系数分别为3.2×10~(-6)℃~(-1)、4.1×10~(-6)℃~(-1)。本文对预制丝的热膨胀行为进行了理论分析和探讨,计算值和实验值较为符合。     

直接免疫PCR方法的建立

免疫PCR基本原理与ELISA相似,即用一段可扩增的DNA分子代替ELISA中酶放大检出信号,建立了直接免疫PCR的检测蓖麻毒素技术,实验结果表明,其灵敏度达1pg／ml,比ELISA方法灵敏度高10^3倍.     

高发射率远红外涂料的理论分析与实验研究

运用分子振动光谱、红外涂层模型和红外吸收系数迭加性等理论,对所选择的粘合剂、颜料和填料及其配制成的远红外涂料进行了详细的实验研究。结果表明,该种涂料是一种在8～12μm波段具有较强吸收性能的远红外涂料。     

计算机辅助动画系统 (GKDCAS)

GKDCAS是一个基于微型计算机环境,使用C语言设计的一个实用动画制作系统。本文阐述了GKDCAS的软件结构与设计方法,介绍了它的功能,并给出了一个用该系统制作动画的实例。     

A hybrid method for simulation factor screening

Factor screening is performed to eliminate unimportant factors so that the remaining important factors can be more thoroughly studied in later experiments. Controlled sequential bifurcation (CSB) and controlled sequential factorial design (CSFD) are two new screening methods for discrete‐event simulations. Both methods use hypothesis testing procedures to control the Type I Error and power of the screening results. The scenarios for which each method is most efficient are complementary. This study proposes a two‐stage hybrid approach that combines CSFD and an improved CSB called CSB‐X. In Phase 1, a prescreening procedure will estimate each effect and determine whether CSB‐X or CSFD will be used for further screening. In Phase 2, CSB‐X and CSFD are performed separately based on the assignment of Phase 1. The new method usually has the same error control as CSB‐X and CSFD. The efficiency, on the other hand, is usually much better than either component method. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

The incentive effect of acceptance sampling plans in a supply chain with endogenous product quality

This article studies a firm that procures a product from a supplier. The quality of each product unit is measured by a continuous variable that follows a normal distribution and is correlated within a batch. The firm conducts an inspection and pays the supplier only if the product batch passes the inspection. The inspection not only serves the purpose of preventing a bad batch from reaching customers but also offers the supplier an incentive to improve product quality. The firm determines the acceptance sampling plan, and the supplier determines the quality effort level in either a simultaneous game or a Stackelberg leadership game, in which both parties share inspection cost and recall loss caused by low product quality. In the simultaneous game, we identify the Nash equilibrium form, provide sufficient conditions that guarantee the existence of a pure strategy Nash equilibrium, and find parameter settings under which the decentralized and centralized supply chains achieve the same outcome. By numerical experiments, we show that the firm's acceptance sampling plan and the supplier's quality effort level are sensitive to both the recall loss sharing ratio and the game format (i.e., the precommitment assumption of the inspection policy). © 2013 Wiley Periodicals, Inc. Naval Research Logistics, 2013     

丁羟（HTPB）推进剂老化研究（IV）——过氯酸铵（AP）粒度对老化性能的影响

本文研究了HTPB/AP推进剂中AP粒度对推进剂老化性能的影响。实验是在90℃的空气中进行的。老化性能以推进剂的拉伸性能、邵氏硬度,失重%和燃烧速度等参数为判据,并以DSC图谱作参考。实验结果表明:HTPB/AP推进剂中AP粒度的减小,有助于推进剂贮存老化性能的提高。各种粒度AP的DSC图谱,也进一步证实了这一结论。     

空域频域不确定条件下电磁探测卫星规划方法研究

电磁探测卫星对区域目标的覆盖搜索在反恐及海上搜救等领域发挥着重要作用.针对电磁探测卫星区域搜索任务中存在的空域频域不确定性,构建了电磁探测卫星区域搜索问题(EDSASP)中不确定因素的量化描述模型及决策要素模型,提出了基于贝叶斯决策的电磁卫星任务规划方法,并以信息探测收益和前端截获收益为优化目标,建立了空域频域不确定条...     

Quay crane scheduling at container terminals to minimize the maximum relative tardiness of vessel departures

In this paper, we study the problem of scheduling quay cranes (QCs) at container terminals where incoming vessels have different ready times. The objective is to minimize the maximum relative tardiness of vessel departures. The problem can be formulated as a mixed integer linear programming (MILP) model of large size that is difficult to solve directly. We propose a heuristic decomposition approach to breakdown the problem into two smaller, linked models, the vessel‐level and the berth‐level models. With the same berth‐level model, two heuristic methods are developed using different vessel‐level models. Computational experiments show that the proposed approach is effective and efficient. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2006